Hotsale Realtime GT06 GPS GPRS Car Tracker Locator Anti-theft SMS Tra…




Applications: – Vehicle leasing, fleet management and more – Motorcycle, scooter, bike anti-theft – Motorcycle, scooter, bike real-time tracking – Manage personnel Main functions: – Change password, make sure the new password is in 6 digits arabic numbers. – Authorization, there are 4 numbers to be allowed to authorize in the tracker at most, you just need send SMS in the format specified to the device. – Single locating, if there is no authorized number, any number dials up the device number, it will report tracking message. – Dialing and SMS tracking, make a call or send SMS to the device number, it will hang up and reply a real-time tracking message. – Continuous tracking automatically, send specified format message, it will report real-time tracking message. – Alarms, it sets with GEO-fence alarm, ACC working alarm. – It can cut off and resume the oil and power system of your vehicle by send specified format SMS to the device. – You can set up arm by the SMS and the remote controller, you can disarm through the same way too. – It has 3 modes to switch, the tracker, the monitor listening, and the dial mode. – With it, you can check the vehicle state, IMEI, and reset SMS, set time zone, GPRS, APN, IP and port, and reset the device. Remark: – Storage Temperature: -40 to 85 Deg.C – Operation Temperature: -20 to 55 Deg.C – Humidity: 5 – 95 percent Type: GPS,Tracker Model: GT06 GPS Bands : GSM 850/900/1800/1900MHz Network : GPRS,GSM Voltage Range: 12V – 24V GPS Sensitivity: – 159 dBm GPS Start Time: Cold status:45s, Warm status:35s, Hot status:1s GPS Positioning Precision : 5M Package weight: 0.2552 kg Product size (L x W x H): 9.80 x 5.00 x 1.30 cm / 3.86 x 1.97 x 0.51 inches Package size (L x W x H): 10.00 x 6.00 x 2.00 cm / 3.94 x 2.36 x 0.79 inches Package Contents: 1 x GT06 GPS SMS GPRS Vehicle Tracker Locator Remote Control Alarm, 1 x Bilingual User Manual in English and Chinese- Initialization, send SMS ( # begin # 123456 # ) to the unit, it replies OK, then you initialize all the settings to default factory settings.